10 Simple Steps for Expert Window Track Cleaning

Exit Bond Cleaning Brisbane: 10 Steps for Window Track Cleaning

Have you ever gazed at the window tracks and thought to yourself where does all this grime come from? Or have you noticed how filthy and dusty they get but thought how messy and uncomfortable it would be to clean them? Worry not, you are not alone! If it is any consolation, most of us feel that way with window tracks and considering there are a few small areas that are difficult to reach, it is hard to avoid the dirt build-up. But here is the positive side of it all: it need not always be this hard and applying a few tips and having the right equipment would see this chore accomplished in very few minutes saving you lots of time and with the window tracks looking clean and in good working order as also done by Bond Cleaning in Brisbane. 

Can you imagine every time you open a window, there are clean window tracks free from all forms of dirt? For cleaning right from the corners to the corners, we shall guide you through a process of 10 steps provided by Exit Bond Cleaning Brisbane to make it proper without stress. Alright, you can grab a few things from your house like baking soda, vinegar and a toothbrush so that we can get those window tracks looking clean.

Step 1: Gather Your Supplies

According to Exit Bond Cleaning Brisbane, equipping yourself with the appropriate tools will ease the entire process. In the case of cleaning window tracks you will require the following:

• A vacuum cleaner with a narrow attachment
• A toothbrush or small, stiff-bristled brush
• A butter knife (or a similar tool) that has been covered with a cloth for use in tight spaces
• Cleaning cloths or paper towels
• Baking soda
• White vinegar
• A spray bottle
• Dish soap 
• A small bowl filled with warm water

Stage 2: Commence Cleaning with Vacuuming Techniques

Wipe the edges of the door with the narrow nozzle of the vacuum cleaner to remove any loose dirt, dust, and dead bugs settled in the tracks, as per Exit Bond Cleaning Brisbane. This will get rid of most of the larger dirt particles, reducing the cleaning time considerably.

Step 3: Application of Baking Soda

After removing loose dirt, sprinkle baking soda on stained areas, especially in sunken spots where grime builds up. It acts as a gentle scrub, lifting dirt while preventing scratches, according to Exit Bond Cleaning Brisbane.

Step 4: Adding White Vinegar

Applying white vinegar onto the spots where baking soda has been applied is the next step, as per Bond Cleaning in Brisbane. This will produce a fizzling effect which will help to soften any hard and persistent dirt. Wait for about 5 – 10 minutes for the magic of the mixture to work.

Step 5: Scrub with a Brush

First, allow the baking soda and vinegar to rest after which take a toothbrush or a small brush to clean the tracks as per the opinion of Exit Bond Cleaning Brisbane. Scrub the corners and the edges thoroughly. The reaction of the baking soda with the vinegar should help to dislodge any ingrained dirt which will be easier to scrub away, according to Bond Cleaning in Brisbane.

Step 6: A Butter Knife Can Fit into Any Corner

For narrow corners and other areas inaccessible to the brush, a flat tool such as a butter knife can be wrapped in a cloth, based on the suggestions of Exit Bond Cleaning Brisbane. This method makes it easy to clean confined spaces without the risk of scratching the guided surfaces. To loosen the surface dust, a cloth can be dipped into warm water containing a few drops of detergent. 

Step 7: Clean the Surface Using a Wet Rag

After scrubbing the surfaces, a damp cloth/paper towel should be used to remove any remaining dirt and excess baking soda. Wiping should be continued until all tracks are visible and without any obstructions, centred on the advice of Exit Bond Cleaning Brisbane.

Step 8: Clean with Warm Soapy Water

To ensure an extra level of cleaning, take a clean piece of rag, dip it in warm soapy water, and then clean the tracks once more, as recommended by Exit Bond Cleaning Brisbane. This will help eliminate the last traces of dirt and vinegar odour if any.

Step 9: Completely Dry Up the Tracks

After cleaning, drying is necessary to eliminate excess moisture that can cause rust or mildew. Use a duster to clean the tracks and ensure they remain free of any moisture, according to Exit Bond Cleaning Brisbane. If cleaning is being done on a bright sunny day, open the window to facilitate drying.

Step 10: Follow Regular Maintenance

To keep your window tracks in good condition, include them in your regular cleaning routine. Vacuuming and wiping them every two weeks will prevent dirt buildup. This makes deep cleaning faster and easier.

More Ways To Ensure Sparkling Clean Tracks

• Stay Away From Harsh Cleaners: The materials which are used to make window tracks are usually soft and as such, located cording and scratching surfaces. The only cleaning agents allowed during cleaning should be household items such as baking powder and vinegar, according to Bond Cleaning in Brisbane. 
• Secondly, Use a Microfiber Towel for the Final Cleaning: Microfiber towels at the last stage of wiping off the dust helps remove all remaining dust without leaving any bub on the surface.
• Reapply Sleek Coat Only When Necessary: If for instance, your windows are sticky and do not slide with ease, then you may apply a silicone spray after cleaning but not oil-based. It is recommended by Bond Cleaning in Brisbane not to use oil-based lubricants as these would only attract dirt over a period of time.

Conclusion

While it may be a minor detail, cleaning the window tracks can improve the overall cleanliness of the house and also assist in the functionality of the windows, as per Exit Bond Cleaning Brisbane. You can also use Pressure Cleaning as an additional technique. By following these simple processes and maintaining them regularly, you will keep your window tracks looking and functioning like new.

Also learn more about Types and Popular Choices of Pest Control Methods here.